英语翻译IntroductionSmall scale bending tests were conducted on
来源:学生作业帮 编辑:百度作业网作业帮 分类:英语作业 时间:2024/03/29 17:54:06
英语翻译
Introduction
Small scale bending tests were conducted on eleven 22 mm outer diameter single walled
pipes with wall thicknesses varying between 1.3 mm and 4.3 mm in preparation of the
full scale bending tests on Tight Fit Pipe.In the small scale bending tests observations
and experiences with the forces applied by the small scale bending rig on the pipe were
used in the design of the full scale bending rig.Small scale bending tests were also
executed to become familiar with performing bending tests [19].
This chapter starts by explaining how in reality the spooling-on phase during the actual
reeling installation process is executed (Subsection 5.2).Next,the reeling simulation
tests in the small scale bending rig are described (Subsection 5.3).The test set-up of the
small scale bending rig is shown in Subsection 5.3.1 and the test results are compared
to theoretical predictions in Subsection 5.3.2.In Subsection 5.4 it is discussed how the
bending tests (both in the full scale bending rig and in the small scale bending rig)
resemble the spooling-on phase of the actual reeling process in reality.
Introduction
Small scale bending tests were conducted on eleven 22 mm outer diameter single walled
pipes with wall thicknesses varying between 1.3 mm and 4.3 mm in preparation of the
full scale bending tests on Tight Fit Pipe.In the small scale bending tests observations
and experiences with the forces applied by the small scale bending rig on the pipe were
used in the design of the full scale bending rig.Small scale bending tests were also
executed to become familiar with performing bending tests [19].
This chapter starts by explaining how in reality the spooling-on phase during the actual
reeling installation process is executed (Subsection 5.2).Next,the reeling simulation
tests in the small scale bending rig are described (Subsection 5.3).The test set-up of the
small scale bending rig is shown in Subsection 5.3.1 and the test results are compared
to theoretical predictions in Subsection 5.3.2.In Subsection 5.4 it is discussed how the
bending tests (both in the full scale bending rig and in the small scale bending rig)
resemble the spooling-on phase of the actual reeling process in reality.
找别人给你翻译的:
译得太棒了-----这哪里是英译汉啊?这分明是汉译英的原文!佩服吧!
译得太棒了-----这哪里是英译汉啊?这分明是汉译英的原文!佩服吧!
英语翻译IntroductionSmall scale bending tests were conducted on
英语翻译Table 5.4 shows that for some bending tests the measured
英语翻译in the case where tests are initially conducted with an
英语翻译Abstract:Based on the hydraulic bending control system,t
英语翻译4.Experimental proceduresThe fatigue gear tests were per
英语翻译a number of preliminary micropitting tests were performe
英语翻译Many researchers have conducted numerous studies on ther
英语翻译Many students have been conducted on properties and phys
英语翻译bending machines,bending mandrels,internal pneumatic lin
英语翻译原句The experiments were conducted in a zero-pressure-grad
on a scale of
英语翻译Tests were carried out to study the effects of laughter