百度作业网高分请达人翻译几句话,谢绝机器
来源：学生作业帮 编辑：百度作业网作业帮 分类：英语作业 时间：2024/05/01 01:09:34
高分请达人翻译几句话,谢绝机器
一、 综合布线：在敷设过程中根据敷设线缆的数量确定敷设的管径,1~2根双绞线:SC20 CC,WC,FC;3～4根双绞线:SC25 CC,WC,FC.
二、 门禁系统：控制器与控制器之间采用手拉手485总线方式连接,电源线与信号线单独穿管,RVVPS2*1.0 SC20 RVV2*1.0 SC20 CC,WC.
三、 报警系统：连接探测器线缆电源线与信号线单独穿管,RVV2*1.0 SC20 CC.
四、 监控系统：电源线RVV2*1.0与视频线SYV75-5单独穿管,SC20 CC.
五、 在主干线路中,以上系统共用桥架.
翻译得好,有跟分送
一、 综合布线：在敷设过程中根据敷设线缆的数量确定敷设的管径,1~2根双绞线:SC20 CC,WC,FC;3～4根双绞线:SC25 CC,WC,FC.
二、 门禁系统：控制器与控制器之间采用手拉手485总线方式连接,电源线与信号线单独穿管,RVVPS2*1.0 SC20 RVV2*1.0 SC20 CC,WC.
三、 报警系统：连接探测器线缆电源线与信号线单独穿管,RVV2*1.0 SC20 CC.
四、 监控系统：电源线RVV2*1.0与视频线SYV75-5单独穿管,SC20 CC.
五、 在主干线路中,以上系统共用桥架.
翻译得好,有跟分送
1.integrated wiring:to determine the tube diameter according to the quantity of laying cables in the installation process,1-2 twisted pairs:SC20 CC,WC,FC; 3-4 twisted pairs:SC25 CC,WC,FC.
2.entrance guard system:adopt the “hand in hand” bus method of 485 to connect the controllers,the power wires and the signal wires should be laid in conduits separately,RVVPS2*1.0 SC20 RVV2*1.0 SC20 CC,WC.
3.Alarm System:the signal wires and the power wires connecting the cable of the detector should be laid in one conduit,RVV2 * 1.0 SC20 CC.
4.monitoring system:the power wire of RVV2 * 1.0 and the video cable of SYV75-5 should be laid in one conduit,SC20 CC.
5.the above mentioned systems share the bridge structure in the main trunk line
2.entrance guard system:adopt the “hand in hand” bus method of 485 to connect the controllers,the power wires and the signal wires should be laid in conduits separately,RVVPS2*1.0 SC20 RVV2*1.0 SC20 CC,WC.
3.Alarm System:the signal wires and the power wires connecting the cable of the detector should be laid in one conduit,RVV2 * 1.0 SC20 CC.
4.monitoring system:the power wire of RVV2 * 1.0 and the video cable of SYV75-5 should be laid in one conduit,SC20 CC.
5.the above mentioned systems share the bridge structure in the main trunk line