机械图纸英语1、all fillets and rounds to be r0.03 max2、all dimensio
来源:学生作业帮 编辑:百度作业网作业帮 分类:英语作业 时间:2024/06/03 18:55:05
机械图纸英语
1、all fillets and rounds to be r0.03 max
2、all dimensions include draft and paring line flash
3、part to be free of flash
4、all dimensions include thickness of coating
还有单独图纸上标出paring line
0.19+/- dia csk
5、0.05 ida ejectors4 places
图上标注0.0195 3 PLS
1、all fillets and rounds to be r0.03 max
2、all dimensions include draft and paring line flash
3、part to be free of flash
4、all dimensions include thickness of coating
还有单独图纸上标出paring line
0.19+/- dia csk
5、0.05 ida ejectors4 places
图上标注0.0195 3 PLS
1、all fillets and rounds to be r0.03 max
【所有倒圆周角且最大半径R=0.03英寸】
2、all dimensions include draft and paring line flash
【所有尺寸含拔模角度及分模线的夹线】
3、part to be free of flash
【产品不可以有批锋,毛边】
4、all dimensions include thickness of coating
【所有产品最终尺寸含电镀层的厚度】
还有单独图纸上标出paring line
【写错了,是parting line ,分模线】
0.19+/- dia csk
【螺丝沉头孔直径公差+/-0.19,且 要重直模板】
5、0.05 ida ejectors4 places
【直径0.05英寸的顶针共4处】
图上标注0.0195 3 PLS
【不知写什么,pls 是please,要看图才行.】
【所有倒圆周角且最大半径R=0.03英寸】
2、all dimensions include draft and paring line flash
【所有尺寸含拔模角度及分模线的夹线】
3、part to be free of flash
【产品不可以有批锋,毛边】
4、all dimensions include thickness of coating
【所有产品最终尺寸含电镀层的厚度】
还有单独图纸上标出paring line
【写错了,是parting line ,分模线】
0.19+/- dia csk
【螺丝沉头孔直径公差+/-0.19,且 要重直模板】
5、0.05 ida ejectors4 places
【直径0.05英寸的顶针共4处】
图上标注0.0195 3 PLS
【不知写什么,pls 是please,要看图才行.】
机械图纸英语1、all fillets and rounds to be r0.03 max2、all dimensio
英语翻译以下是一段机械图纸的技术说明:all surfaces to be solvent cleaned to rem
机械图纸上这段英文何意All welds shall be 6mm continuous or as noted
机械图纸上的“all inside corner breaks to have 0.2'' radius”
Money should not become the be-all and end-all of life,to be
请问工程英语中的一段翻译 ALL CUTOUTS AND EXTREMITES TO BE EDGEBARED AS R
机械图纸标注2*2-R0.
All I want to ( )(be)peace and freedom
英语翻译1.All construction to be as per all applicable and gover
英语翻译1)There going to be shower on and off all weekend.There
(1/2)All the passengers and their luggage had to be weighed
几道英语选择1---is konwn to all is that the DIaoyu Islands have be